Fiber Optic Cable
无铠装 PE/LSZH单层护套
Fiber Optic Cable
无铠装 PE/LSZH单层护套
- 描述
- · 光缆
· 中心松套管/无铠装/PE或LSZH单层护套
· 彩色编码光纤，填充式中心松套管，强度构件，撕裂线和外护套
- 线缆结构
ITEMS DESCRIPTION Number of Fibers Max. 24 Loose Buffer Tube PBT (Polybutylene Terephthalate) Filling Compound
in Loose Buffer TubeThixotropic Jelly Compound Strength Member Glass yarns Rip Cord One ripcord Outer Jacket Material Black PE or Black LSZH Thickness Nom. 1.0mm
- 电气性能
ITEMS TEST METHOD AND
ACCEPTANCE CRITERIATensile Loading
And Bending Test# Test method: TIA/EIA-455-33A
-. Mandrel diameter: 30D (D = cable diameter)
-. Installation tensile load: 1,200N for 1 hour
-. Residual tensile load: 600N for 10 minutes
# Acceptance Criteria
-. Fiber strain: ≤ 0.6 for installation tensile load
-. Attenuation increment: ≤ 0.10 dB (SMF)
≤ 0.20 dB (MMF)
for residual tensile loadCompressive Loading
Resistance Test# Test method: TIA/EIA-455-41A
-. Short term load: 2200 N/10cm for 1 minute
-. Long term load: 1100 N/10cm for 10 minutes
# Acceptance Criteria
-. Attenuation increment: ≤ 0.10 dB (SMF)
≤ 0.20 dB (MMF)
after completion of the test
-. No jacket cracking and fiber breakageRepeated Impact Test # Test method: TIA/EIA-455-25C
-. Height of impact: 150mm
-. Impacting mass: 3kg
-. No. of impact cycles: 2 cycles at 3 different points
# Acceptance Criteria
-. Attenuation increment: ≤ 0.10 dB (SMF)
≤ 0.20 dB (MMF)
after completion of the test
-. No jacket cracking and fiber breakageCyclic Flexing Test # Test method: TIA/EIA-455-104A
-. Sheave diameter: 20D (D = cable diameter)
-. No. of flexing cycles: 25 cycles
-. Flexing speed: 30 cycles/minute
# Acceptance Criteria
-. Attenuation increment: ≤ 0.10 dB (SMF)
≤ 0.20 dB (MMF)
after completion of the test
-. No jacket cracking and fiber breakageCable Twist Test # Test method: TIA/EIA-455-85A
-. Cable length twisted: 2m
-. No. of twist cycles: 10 cycles
-. Twist angle: ±180°
# Acceptance Criteria
-. Attenuation increment: ≤ 0.10 dB (SMF)
≤ 0.20 dB (MMF)
after completion of the test
-. No jacket cracking and fiber breakageTemperature Cycling Test # Test method: TIA/EIA-455-3A
-. Temperature cycling schedule
: 23°C → -20°C → 70°C → -20°C → 70°C → 23°C
-. Soak time at each temperature: 8hours
# Acceptance Criteria
-. Attenuation increment: ≤ 0.15 dB/km (SMF)
≤ 0.30 dB/km (MMF)Water Penetration Test # Test method: TIA/EIA-455-82B
-. Length of specimen: 3m
-. Height of pressure head: 1m
-. Test time: 24 hours
# Acceptance Criteria
-. No leakage through the open cable endFlammability Test
(LSZH Jacket Cable only)# Test method and Acceptance Criteria
The cable shall comply with IEC 332-1.
- 应用数据
- 管道或直埋用光通信线缆
- DATA SHEET
- ORDERING GUIDE
