Category 6A
U/UTP CAT.6A 1st generation LSZH Dca
Category 6A
U/UTP CAT.6A 1st generation LSZH Dca
- Cable Construction
- Conductor: The conductors shall be solid, annealed and bare copper with a diameter of AWG23 and minimum acceptable diameter shall be 0.546mm.
Insulation: Each conductor shall be insulated with solid high density polyethylene. The Insulation shall be uniform and shall not have any defects. The diameter over the insulation shall be maximum 1.22mm.
Sheath: The flame retardant PVC or LSZH(Low Smoke Zero Halogen) compound colored grey
or other colors shall be applied over the cable core.
- Electrical Performance
Characteristics
Units
Specification
DC Resistance
Ω/100m
≤ 9.38
DC Resistance Unbalance
%
≤ 4.00
Capacitance Unbalance
(Pair to Ground)pF/km
(800~1000Hz)≤ 330
Insulation Resistance
MΩ-100m
≥ 100
Dielectric Strength
DC kV/sec
2.5 / 2
Impedance
(Characteristic mean)
Ω
100 ± 5% at 100 MHz (IEC standard)
Return Loss dB/100m ≥ 20 + 5 * log(freq) , 1 ≤ f ＜ 10MHz
≥ 25 , 10 ≤ f ＜ 20MHz
≥ 25 – 7 * log(freq/20) , 20 ≤ f ≤ 500MHzAttenuation
(Insertion Loss)dB/100m ≤ 1.82*√(freq) + 0.0091*(freq) + 0.25/√(freq)
, 1 ~ 500 MHzNEXT Loss dB/100m ≥ 44.3 – 15*log(freq/100) , 1 ~ 500MHz Power sum NEXT Loss dB/100m ≥ 42.3 – 15*log(freq/100) , 1 ~ 500MHz ELFEXT Loss dB/100m ≥ 27.8 – 20*log(freq/100) , 1 ~ 500MHz Power sum ELFEXT Loss dB/100m ≥ 24.8 – 20*log(freq/100) , 1 ~ 500MHz Propagation Delay dB/100m ≤ 534 + 36 / √ (Freq) , 1 ~ 500MHz Propagation Delay Skew dB/100m ≤ 45 , 1 ~ 500MHz Nominal Velocity of Propagation % 67
- CPR Compliant
- - The LSZH product comply with CPR reaction to fire : Dca S2D2A1
- IEEE 802.3bt
- DATA SHEET
